Creo Lotem 800 II Series, User Manual

Page: 21 / 43

Handling the Carrier 11
Handling the Carrier
Creo packs 2 carriers in a black plastic file, taped to a piece of cardboard,
inside a cardboard box. You should unpack and store it as explained in the
following procedures.
Unpacking the Carrier
To unpack the carrier from its original packaging:
1.
Stand the cardboard box in an upright position against a wall.
Figure 1: Cardboard box in an upright position
2.
Open the box.
3.
Remove the carrier (it is taped to a piece of cardboard).
CAUTION: The carrier is fragile. Handle it with care to prolong its life.