Creo Dolev 800V+, User Manual

Page: 80 / 90

70 Chapter 5 – Data Configuration Setting
Accessing the Output Device Configuration
The Output Device Configuration on the Brisque is used to configure the
Dolev 800V+/800V
2
/800V
3
, to view the device parameters, to define Press
Formats, and to perform Excurve and Tone Reproduction.
To access the Output Device Configuration:
1.
From the Brisque Launch Pad, open the
Setup
panel.
Figure 22: Brisque Launch Pad with Setup panel open
2.
Double-click the
Devices icon
; the Output Devices Handling window
appears.
The Output Device Handling Window
From the Output Devices Handling window all configurations of the
output devices are performed. From here new devices are configured,
currently configured devices modified or deleted and previously
configured devices are re configured periodically.
All the device groups, device families and device configurations are
displayed in this window, as well as the various operations relevant to each
of the selected configurations. The device specific operations and the
general operations relevant to all output devices are accessed via the
available operation buttons in the Operations section.