Creo Dolev 4press V, User Manual

Page: 97 / 121

Service Utilities Mode 81
Media Info ..
- Select this entry to update the parameters of the currently
loaded film. (For additional details, see Chapter 2, Updating the Media Info
Table on page 51).
Motors Graph !
- For service engineers only.
Expose
Expose menu
Res. Int. Setting >
- Select this entry to calibrate the laser intensity
values for each plotting resolution. (For further details, see Chapter 4,
Resolution Intensity Calibration on page 72).
Test Intensity ..
- Select this entry to Create test exposure strips to examine
the imagesetter’s output. (For further details, see Chapter 4, Resolution
Intensity Calibration on page 72).
Internal Pattern ..
- Select this entry to expose test film with the
imagesetter internal pattern generator. These films are used to check
imagesetter plotting accuracy prior to routine operation.
Res. Int. Setting >
Test Intensity..
Internal Pattern..