Creo Color Controller C-80, Technical Manual

Page: 121 / 150

105
10. Turn over the system board and remove the metal bracket from the board. Set
aside the bracket to install on the new system board.
5.6.4 Installing a New System Board
1. Review Safety Information (Multi-Language) on page v.
2. Verify that the Color Controller C-80 is turned off and that all power cords and
external cables are disconnected.
3. Touch the antistatic package containing the new system board to any
unpainted metal surface on the server, then remove the system board from the
package and place it on the worktable.
4. Turn over the system board.
5. Attach the metal bracket to the system board.
Attention: When you handle electrostatic discharge (ESD) sensitive devices,
take precautions to avoid damage from static electricity.
Note: The new system board includes a new black plastic CPU load plate,
which you can discard.
Note: The Color Controller C-80 is supplied with a reusable metal bracket
attached to the underside of the system board. The metal bracket is part of the
CPU cooling kit (Creo part number 518-03787A).