Creek Audio OBH 21 Operating Instructions Download Page 1

SPECIFICATION

Creek OBH 21/21SE 

STANDARD

Headphone Amplifier

OUTPUT POWER

> 10 mW into 30

W

 to 300

W

 loads

HEADPHONE IMPEDANCE
THD

< 0.01% at 1 kHz

SIGNAL TO NOISE RATIO

> 70 dB

POWER CONSUMPTION

< 4VA

POWER SUPPLY

24V DC 150 mA

DIMENSIONS

180 x 100 x 66mm (7.4 x 4 x 2.6 “)

WEIGHT

570 gms  (20 ozs)

SPECIAL EDITION

OUTPUT POWER
HEADPHONE IMPEDANCE
THD
SIGNAL TO NOISE RATIO

Operating

POWER CONSUMPTION
POWER SUPPLY

Instructions

DIMENSIONS
WEIGHT

Thank you for purchasing the OBH 21/21SE headphone amplifier. 
You  are  now  in  possession  of  a  state-of-the-art  product.  The 
functions and operation of the OBH 21/21SE are extremely simple. 
The following notes are provided to explain all aspects of its design 

WARRANTY

and use.

If within two years of the purchase date your OBH product proves to 
be defective for any reason other than accident, misuse, neglect, 

The OBH 21 is a miniature audio amplifier, designed specifically to 

unauthorised  modification  or  fair  wear  and  tear,  Creek Audio  Ltd 

drive  two  pairs  of  low  to  medium  impedance  (30

W

  to  300

W

will,  at  its  discretion,  replace  the  faulty  parts  without  charge  for 

headphones from a line level source. The OBH 21SE is a high end 

labour or return carriage within the U.K.This warranty is valid only 

version  using  more  expensive  components.  It  is  more  efficient  to 

within  the  U.K.  and  given  in  addition  to  statutory  rights.  Service 

have a small amp do this rather than waste the power of a full size 

enquiries  outside  the  U.K.  should  be  addressed  first  to  the 

one when only driving headphones.

supplying  dealer  and  or  Creek  distributor/importer.  Warranties 
granted  in  these  countries  are  entirely  at  the  discretion  of  the 

The OBH 21 and 21SE are compatible with any source at line level. 

distributor.

For  example  the  average  output  level  of  a  CD  player  can  be 
connected directly to the input of the OBH 21/21SE just as it could 

Creek Audio Limited

also  be  used  in  conjunction  with  a  stand-alone  pre-amplifier  or 

12 Avebury Ct, Mark Road, Hemel Hempstead HP2 7TA  England 

integrated amplifier which doesn’t have a  headphone socket.

Telephone: +44 (0) 1442 260146   Fax: +44 (0) 870 622 0846

E-mail: [email protected]  Web: www.creekaudio.com  

30

W

 to 300

W

> 10 mW into 30

W

 to 300

W

 loads

30

W

 to 300

W

< 0.005% at 1 kHz
> 70 dB
< 6VA
24V DC 250 mA
180 x 100 x 66mm (7.4 x 4 x 2.6 “)
570 gms  (20 ozs)

Reviews: