assEMbLy storagE & HanDLIng
Do not stack PCBs or assemblies containing XLamp ML family LeDs. PCBs or assemblies containing XLamp ML family LeDs should be
stacked in a way to allow at least 1-cm clearance.
Do not use bubble wrap directly on top of XLamp ML family LeDs. Force from the bubble wrap can potentially damage the LeD.
P
CorrECt
P
CorrECt
X
Wrong
10
10
Copyright © 2010-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree
®
, the Cree logo and XLamp
®
are registered trademarks of Cree, Inc. Other
trademarks, product and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. This document is provided
for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree
Sales at [email protected].
10
XLamp
®
mL FamiLy LED SoLDEring & HanDLing