LPN00838X0004A0_A
1 of 3
Connected Max Scene Controller
Smart In-Wall 5-Button Scene Controller
Includes: CMACC-CMSC-UNV-WH
INSTALLATION INSTRUCTIONS
INSTRUCTIONS D’INSTALLATION
IMPORTANT SAFEGUARDS
When using electrical equipment, basic safety precautions should
always be followed including the following:
READ AND FOLLOW ALL
SAFETY INSTRUCTIONS
1. Before installing Wireless Scene Controller turn off the power at
the circuit breaker.
Couper l’alimentation avant l’installation
2. These Wireless Scene Controller must be installed in accordance
with the national and local building codes and electrical wiring
codes including wiring methods and wiring connections. If you
are not familiar with these codes and requirements, consult a
qualified electrician.
Ce produit doit être installé conformément à NEC ou votre code
électrique local. Si vous n’êtes pas familier avec ces codes et ces
exigences, veuillez contacter un électricien qualifié.
3. Indoor use only and suitable for damp locations.
Pour usage interieur seulement et convient aux emplacements
humides.
4.
Any changes or modifications to these devices not explicitly
approved by manufacturer could void your authority to operate this
equipment.
SAVE THESE INSTRUCTIONS
FOR FUTURE REFERENCE
C
S
M
C
-
C
C
A
M
C
SCENE CONTROLLER
CMACC-CMSC-UNV-WH
UNIT DESCRIPTION
The Smart In-Wall 5-Button Scene Controller is used with Cree Lighting app to provide wireless preset/scene control of Connected Max Smart LED
lights. Personalize to control or change scenes at the push of button.
LOAD TYPES
Smart In-Wall 5-Button Scene Controller support Cree Lighting Connected Max Smart LED light.
• Voltage: 120-277V, 60Hz
• Depth in Wall: 1.5"
• For ease of installation, Cree recommends the use of a deep wall
box.
• NOT FOR USE WITH METALLIC FACEPLATES.
• Type 1 enclosure & IP20 Indoor use
• Operating Temperature limit of the control: 0 to 35C
•
Panel function for Connected Max Smart LED lights
• Pollution degree 2 Suitable for normal household air circulation
•
Rated impulse voltage: 4000 V
