Troubleshooting B-1
B
Troubleshooting
Problem Installing
Software
The setup program for Video Blaster WebCam 3 does not run automatically after you insert the
installation CD into the drive.
Cause
The AutoPlay feature in your Windows system may not be enabled.
Solution
To install the software from the CD:
1. Leave the installation CD in the CD-ROM drive.
2. Click Start -> Run.
3. In the Run dialog box, click D:\WCCTRL\SETUP.EXE
4. Follow the instructions on the screen to complete the installation.
Problems Using
Video Blaster
WebCam 3
There is no USB port available to connect the USB cable.
Solution
Do one of the following:
❑
Unplug the device currently connected.
❑
Add a self-powered USB hub.
❑
Add a PCI USB card.
An application reports that the video driver is already in use, or that the camera cannot be found.
Solution
Do the following:
