background image

Technical Support E-3

More than 30 days since date of 
purchase

First contact European Technical Support (see 
Creative Technical Services section for 
contact numbers) to establish the nature of the 
problem and details on our repair returns 
procedure. Creative Labs requires that all 
returns for repair/replacement must first be 
issued with an authorisation number.

Returning a product for 
repair

Contact Technical Support to receive your 
authorisation number for 
repair/replacement of product. The 
authorisation number is only valid for 90 
days, after which you must call Technical 
Support to obtain a new authorisation 
number. 

Creative Labs will dispatch a pre-paid 
returns shipment package with 
instructions on how to return the product 
for repair. 

On receipt of the packaging, you should 
insert only the faulty hardware item in 
question and mail it to the Creative 
address printed on the package provided.

Upon receipt of the faulty item, Creative 
Labs will process your request and 
arrange return.

Before mailing your package please 
ensure the authorisation number is clearly 
quoted on the outside of the packaging.  

To avoid tariffs when shipping a product to 
Creative Labs from outside the E.U., you must 
complete the relevant customs documentation 
before shipping the product (please allow 30 
days).

Limited Warranty

Creative Labs (Ireland) Limited (“Creative”) 
warrants to you, the original purchaser only, 
that the hardware product will be free of 
defects in materials and workmanship for a 
period of two years after the date of purchase, 
or such other period as may be expressly 
specified by Creative or required by 
applicable law (“Warranty Period”).

Creative’s entire liability and your remedy 
will be, at Creative’s sole discretion, the repair 
or replacement (with the same or similar 
model) of any hardware or accompanying 
item(s) not meeting the “Limited Warranty” 
explained above that is returned to Creative’s 
authorised distributor or dealer during the 
Warranty Period with a copy of your receipt.

What this warranty does not 
cover

To the maximum extent permitted by 
applicable law, Creative disclaims all other 
warranties and conditions, expressed or 
implied, including  the conditions of quality, 
merchantability or fitness for a particular 
purpose with respect to the use of this product. 
Creative also disclaims any obligation to 
support products for all operating 
environments - for example, by ensuring 
interoperability with future versions of 
software or hardware.  In no event shall 
Creative or its licensors be liable for any 
indirect, incidental, special or consequential 
loss or for any lost profits, savings or data 
arising from or relating to the use of this 
product, even if Creative or its licensors have 
been advised of  the possibility of such loss. 

Note: Creative may replace or repair the 
product with new or reconditioned parts, 
and the faulty parts will become the 
property of Creative. The warranty period 
for your repaired/replacement item is 90 
days from the date of shipment from 
Creative, or what is left on the original 
item’s warranty, whichever is longer.

Summary of Contents for Sound Blaster Live!














































Reviews: