background image

4-10 Memory Configuration and BIOS Settings

Table 4-5: The BIOS Features Setup Screen items.

Option

Description

Virus 
Warning

When this is enabled, the BIOS will monitor the boot sector and partition 
table of the primary hard disk drive and warn of any attempt to write to it.  
If an attempt is detected, the BIOS will halt the system and the following 
warning message will appear:

In this situation, restart your system from a virus-free bootable floppy disk 
and then use an anti-virus utility located on the floppy disk to check the 
hard disk. The default setting is Disabled.

CPU Internal 
Cache

Enables CPU internal cache to speed up memory access.

External 
Cache

Enables CPU secondary cache to speed up memory access.

CPU L2 
Cache ECC 
Checking

Enables the CPU’s ECC function. The default is Enabled.

Note: Some Pentium-II processors do not support the ECC function. In 
such cases, this option will be bypassed.

Quick Power 
On Self Test

If this is enabled, BIOS will shorten or skip some check items during 
Power On Self Test (POST) to speed up the process.

Boot 
Sequence

Determines which drive the computer searches first for the disk operating 
system.  Default setting is: A, C, SCSI. BIOS also supports system bootup 
from CD-ROM drive or SCSI hard disk drive.

m003-4.fm  Page 10  Tuesday, July 27, 1999  10:29 AM

Summary of Contents for PLASTER PC M003





































































Reviews: