14 Live Drive CT4860/CT4861
Installing Software
1. Insert the installation disc into your CD-ROM drive.
The disc supports Windows AutoPlay mode and starts running automatically.If not, see
“Troubleshooting” on page 15.
2. Follow the instructions on the screen to complete the installation.
Additional Features in
Device Controls
After you install the software for the Live! Drive, you will be able to enable the SPDIF Bypass
feature for your digital inputs and outputs, and mute your speakers when you plug your
headphones into Live! Drive. These two new features appears as two new tabbed pages in
Device Controls.
Digital I/O
To enable the SPDIF Bypass feature:
•
On the Digital I/O tabbed page, select the Enable check
box to place a check mark in it.
SPDIF Bypass is required if you want audio signals
passing through SPDIF In to be routed directly to SPDIF
Out, without passing through the processor chip.
Live! Drive
To mute the speakers when using headphones:
•
On the Live! Drive tabbed page, select the Mute
speakers when using headphones check box to place a
check mark in it.
