10 Live Drive CT4860/CT4861
Step 4: (Optional)
Install the Digital DIN
Metal Bracket
(To connect to
FPS2000 or DTT2500
speakers)
1. Remove the metal plate from a vacant ISA or PCI expansion slot.
2. Align the Digital DIN metal bracket with the vacant expansion slot opening.
3. Secure the metal bracket to the system casing with a screw.
Step 5: (Optional)
Connect to the
Digital I/O Card
(Only if you have one)
Connect the light grey flat cable to the Digital I/O card’s AUD_EXT header.
If you have difficulty connecting to the AUD_EXT header:
1. Remove the Digital I/O card from the system.
2. Connect the light grey flat cable to the Digital I/O card.
3. Place the metal bracket of the Digital I/O card into the vacant bracket on the system casing.
4. Secure the card to the system casing with a screw.
Step 6:
Complete the
Installation
1. Connect the power splitter cable to the system power supply unit.
2. Replace the cover onto your system.
3. Plug the power cord back into the wall outlet, and switch on the system.
Using Your
Live! Drive
The Live! Drive will most undoubtedly give you endless hours of listening pleasure. The
following information and diagrams on the next two pages show how you can connect to your
Live! Drive to optimize your enjoyment.