Test Report
No. 2024608/EE
Date : Sep 08 2011
Page 1 of 19
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at
www.sgs.com/terms_e-document.htm.
Attention is drawn to the limitation of liability, indemnification and
jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of
Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or
appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested
and such sample(s) are retained for 30 days only
.
SGS Hong Kong Ltd. 5/F - 8/F & 28/F -29/F, Metropole Square, 2 On Yiu Street, Siu Lek Yuen, Shatin, N.T., Hong Kong.
t
(852) 2334 4481-9
f
(852) 2764 3126 www.hk.sgs.com
Member of the SGS Group (SGS SA)
FCC Test Report (Verification)
Application No.
:
SZEM1108002755IT (2024608/EE)
Applicant
:
Creative Technology Ltd.
Address of Applicant
:
31 International Business Park, Creative Resource, Singapore 609921
Manufacturer/Factory
:
Dong Guan Tai Sing Manufacturing Factory
Address of Manufacturer
/Factory
:
Tai Sing Industrial Road, Bai Zhou Bian Village, Dong Cheng, Dongguan
City, Guangdong Province 523113, P.R. China
Equipment Under Test (EUT):
EUT Name:
Audio accessory
Item No.:
HS450
Trade:
Creative Labs
Standards
:
FCC PART15 SUBPART B:2010
Date of Receipt
:
2011-08-04
Date of Test
:
2011-08-08 to 2011-08-09
Date of Issue
:
2011-09-08
Test Result :
Pass*
*
In the configuration tested, the EUT complied with the standards specified above.
Jack Zhang
EMC Laboratory Manager
The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report.
If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new
system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS
International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by
SGS International Electrical Approvals in writing.
The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of
the federal government. All test results in this report can be traceable to National or International Standards.
