CRE TECHNOLOGY - 130, allée Charles-Victor Naudin - Zone des Templiers - SOPHIA ANTIPOLIS - 06410 BIOT - FRANCE
Phone : + 33 (0)4 .92.38.86.82 - www.cretechnology.com - [email protected]
QUICKSTART_SYNCHRO COMPACT_EN_A2020
ACTIVE DISPLAY
NAVIGATION
quick start
synchro compact
The purpose of this document is to allow a fast
and easy handling of the product, nevertheless
it is essential that you refer to the technical
documentation for the commissioning.
For any further information on this product,
please contact your local distributor or agent
or directly our support team.
• All our products have a 1 year warranty
• Help desk: +33 492 38 86 86
• E-mail: [email protected]
• SKYPE: support-cretechnology.com
(
www.cretechnology.
com/en/paralleling/119/synchro-compact)
,
technical documentations section (
File:
#synchro-compact-technical-documentation-en-
xxxx.pdf#
)
OPERATIONNAL MODES
Once the
SYNCHRO COMPACT
is switched on, you can access the menu on 3 different levels (
To access the password page, press ESC.):
·
Level 0
: No password required, just press «ENTER» to access the display,
·
Level 1
: Just press «ENTER» to go to Display menu. Press
«↓»
to select «configuration or «system» of the
SYNCHRO COMPACT
. Press «ENTER» to switch to password
mode. Press
«↑»
to change the character; press
«→»
to move to the next character level 1 password «1».
NOTE
: The level 1 password gives you access to minimum settings recommended to start your commissioning on your power plant, is the equivalent of standard mode on
the i4Gen Suite software.
·
Level 2
: Just press «ENTER» to go to Display menu. Press
«↓»
to select «configuration or «system» of the
SYNCHRO COMPACT
. Press «ENTER» to switch to password
mode. Press «
↑
» to change the character; press «
→
» to move to the next character Level 2 password «1234»
NOTE
: The level 2 password gives you access to maximum settings to commission your power plant, it is the equivalent of advanced mode on the i4Gen Suite software. For
complex settings use i4Gen Suite (analogue inputs, Easyflex, scheduler,etc ..).
MENUS
THE DIFFERENT MENUS WILL APPEAR AS FOLLOW
DISPLAY
GENERATOR
Electrical measures on generator
and AVR : frequency, voltage, PT.
BUS
Electrical measures on bus : fre-
quency, voltage, PT.
SYNCHRO.
Electrical measures on synchroni-
sation : phase, frequency, voltage,
phase sequence.
ENGINE
Engine speed measures : nominale
speed and régulation.
INPUTS/
OUPUTS
Real time displays for digital I/Os,
and CANOpen digital I/Os.
ABOUT
Information on hardware product :
serial number, firmware version.
CONFIGURATION
GENERAL
Installation description (my number, number of generator).
Level 2 :
Dead bus management,
voltage system, phase control.
GENERATOR
Definition of the electrical measure, ratio PT and generator nominal values (Hz, V). AVR Control
(amplitude, offset, droop).
Level 2 :
AVR Control (AVR Inverse, dead band, pulse divider).
BUS
Nominal voltage and PT ratios.
ENGINE
Engine definition: Engine type, speed sensor and setpoint. Speed governor control (amplitude,
offset, droop).
Level 2 :
J1939, speed Setpoint 2 Speed Control (Speed Inverse, dead band, pulse
divider).
INPUTS/OUTPUTS
Digital inputs and outputs settings. Relays outputs settings. Breaker control settings.
CONTROL LOOPS
Synchronization settings (Global gain Freq, phase, Volt).
Level 2:
same settings with proportional,
integral, derivative.
GENERATOR
PROCTECTIONS
*
Protections on voltage, frequency and unbalance.
OTHER
PROTECTIONS
*
Protections on analogue inputs Battery, boost battery, outputs.
TIMERS
*
Timers settings for stabilisation and horn.
SYNCHRO.
*
Voltage, frequency, phase windows accept, and fail to synch timer.
MODIF. BY VAR
NUMBER
*
Personnalized settings (for experienced users only).
SYSTEM
DATE/TIME
Regional set-
tings, on date
and time
SCREEN
SETUP
Screen set-
tings about
contrast,
backlight,
screen saver
ETHERNET
Ethernet com-
munication
settings, IP,
etc ..
* LEVEL 2 ONLY
The
SYNCHRO COMPACT
can be configured and controlled with the front panel:
·
The top end and middle part: dedicated to the navigation, monitoring and measure display.