12
Crazy3DPrint CZ-300
INSTALLATION
INSTALLING ELECTRICAL PARTS
Accessory Preparation
Control Box & Power Supply (*1)
Cable Tie (Min. *4)
11
4-2
Must Not
turning on the power supply during the assembly, it easily gets electric shock. For easy identifica
-
tion, users may refer to the color marking for installation.
X Axis Motor
(6PIN Black Housing)
C: Extruder Motor
(6PIN Blue Housing)
D: Z Axis Motor
(6PIN White Housing)
Z Axis Sensor
(3PIN White Housing)
X Axis Sensor
(3PIN Black Housing)
A: Y Axis Motor
(6PIN Yellow Housing)
B: Y Axis Sensor
(3PIN Yellow Housing)
A
B
C
D
• X-Motor & X-Sensor (Black Marking)
1) Remove the screw from the X-motor; following place the ground wire ring on the screw hole and tighten by the screw.
1) Plug the 6-pin black housing into the X-motor socket; following plug the 3-pin black housing into the X-sensor socket.
