manualshive.com logo in svg

Cray Urika-GX, Administration Manual

Share
Download
Cray Urika-GX Administration Manual Download Page 95

4. Use the Timezone drop down on the Org Preferences page to select the timezone of choice.

Figure 16. Org Preferences Interface

4.9

Create a New Grafana Dashboard

Prerequisites

This procedure requires administrative privileges. Before performing this procedure, use the 

urika-state

command to ensure that the system is operating in the service mode that supports using Grafana. For more
information, see the 

urika-state

 man page and refer to 

Urika-GX Service Modes

 on page 177.

About this task

In addition to the default set of dashboards, administrators can add additional dashboards to the Grafana UI, as
described in the following instructions.

IMPORTANT: New graphs can be created/added by user of any role type. However, those added by a
user with the role of a 'Viewer' persist only for the current session and will be deleted once the user logs
out.

System Monitoring

S3016 

 

 95

Summary of Contents for Urika-GX

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands