manualshive.com logo in svg

Cray Urika-GX, Administration Manual

Share
Download
Cray Urika-GX Administration Manual Download Page 238

For example, if the LDAP server’s URL is 

hostname.com

, the line:

# 

uri"ldap://[myldap]/ou=external,dc=local"

should be uncommented and customized to look like the following:

uri"ldap://hostname.com/ou=external,dc=local"

3. Save the 

/usr/local/openldap/etc/openldap/slapd.conf

 file.

4. Restart the 

slapd

 daemon, which listens for LDAP connections.

[root@

login-1

 ~]# 

service slapd restart

5. Restart the 

oddjobd

 daemon, which provides a means for invoking and taking limited control of applications.

[root@

login-1

 ~]# 

service oddjobd restart

6. Ensure that LDAP has been set up properly

a. Log on to the System Management Workstation (SMW) as root.

b. Verify that the users registered with LDAP are listed on all the nodes.

In the following example, 

system-smw

 is used as an example for the SMW's hostname and 

username

 is

used as an example of an LDAP user's username.

# root@

system-smw

 

pdsh -w nid000[00-47] 'id username'

c. Log on to login node 1.

# 

ssh root@login-1

d. Verify that all LDAP users are listed when the 

ldapsearch

 command is executed for all entries:

[root@nid00030 ~]# 

ldapsearch -h 127.0.0.1 -D "cn=crayadm,dc=local" -w initial0 -b "dc=local"

For information about internal LDAP or the LDAP server, contact Cray Support. For advanced configuration
settings, see the OpenLDAP Software Administrator’s guide at 

http://www.openldap.org

.

7.14.1 Enable LDAP for Connecting Tableau to HiveServer2

Prerequisites

This procedure requires root privileges.

About this task

This procedure provides instructions for enabling LDAP for connecting HiveServer2 to Tableau or other external
clients.

Procedure

1. Log on to the SMW.

Security

S3016 

 

 238

Summary of Contents for Urika-GX

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands