manualshive.com logo in svg

Crane NRI G-13.mft Standard, Operating Instructions Manual

Share
Download
Crane NRI G-13.mft Standard Operating Instructions Manual Download Page 11

G-13.mft standard/Casino/SGI/BDTA/AMU

S

AFETY

 

INSTRUCTIONS

11

National Rejectors, Inc. GmbH, Buxtehude

2

Safety instructions

Before operating the device for the first time, please read through these
instructions carefully at least once, and most importantly the safety
instructions. This is to ensure you have understood the contents of these
instructions as well as how to operate the coin validator.

Proper use

Series G-13.mft coin validators with a parallel interface described in these
instructions are intended to be used in amusement, vending and service
machines with a parallel interface and are supposed to check the coins
inserted in the machine for specific coin properties.

These coin validators have been constructed in compliance with the state
of the art and recognized safety regulations. Nevertheless this equipment
can be a source of danger. Therefore please observe the following safety
regulations.

Summary of Contents for NRI G-13.mft Standard







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands