9
National Rejectors, Inc. GmbH, Buxtehude
c
2
Configuration
G
eneral
informaTion
General information
2
In order to keep the manual as short as possible, this chapter provides
you with all general information, which will not be repeated in the following
chapters (e.g., connecting the HENRI setting module).
The vending machine interfaces
This manual refers to the configuration of all currenza c
2
models. The
models have different configuration options, e.g., due to different vending
machine interfaces.
The chapter title supplement put in brackets limits a certain function or
setting for one or several interfaces.
The user interfaces
Beyond that the currenza c
2
models differ in their user interface. The c
2
blue
is the only model with a user interface allowing a direct configuration at the
coin changer. All other models (green, orange, white) must be connected
to the HENRI setting module for configuration, that cannot be carried out
using the switching block on the rear of the coin validator.
When to use the HENRI setting module?
To configure the c
•
2
green/orange/white
To configure a second currency/special token values in the c
•
2
blue/
green/orange/white
As data transfer unit for e.g. current configuration and firmware files,
•
which are supposed to be loaded into a c
2
blue/green/orange/white
Summary of Contents for NRI Currenza C2
Page 2: ......
