Crane NRI Currenza C2, Technical Documentation Manual

Page: 49 / 83

49
National Rejectors, Inc. GmbH, Buxtehude
c
2
Configuration p
eripheral
Specifying active levels of the hopper payout and empty signal
In order that the coin changer is able to evaluate the signals coming from
the hopper(s), when a hopper pays out a coin or is empty and can no longer
pay out coins (only with optional empty detection), you must set the signals’
active levels (low/high).
Make sure that all hoppers connected use the same active level for
the coin signal or the empty signal (cp. separate manuals for the NRI
hopper currenza h
2
and hopper interface).
To specify the active levels:
Quick approach:
= Main menu > E = Settings > Peripheral > Hopper > Coin signal/empty signal of hopper
Press key ... How often? effect
1
1 x You enter the main menu
2
1 x You enter the s
eTTinG
menu
3
until Peripheral You want to enter submenu p
eripheral
4
1 x You enter the submenu
5
until Hopper You want to enter submenu h
opper
6
1 x You enter the submenu
7
until Coin signal of
hopper
You want to specify the active level of
the coin payout signals coming from
the hopper
8
1 x Now you can specify the active level
9
/
until setting desired
The signals are supposed to be h
iGh
/
acTive
/ l
ow
/
acTive
10
1 x You lock the setting in memory
11
Press -key and repeat steps 8 to 10 to specify the empty signal coming from the hopper
(only for hoppers with empty detection)
12
1 x/2 x
You return to main menu/operating
mode