Crane BARNES 6SE-EHA Series, Installation And Operation Manual

Page: 4 / 22

SECTION: A- PUMP SPECIFICATIONS
DISCHARGE: 6" (152mm) 125 lb, Horizontal.
LIQUID TEMPERATURE: 104°F (40°C) Continuous.
VOLUTE: Cast Iron, ASTM A-48 Class 30,
With Bronze Wear Ring.
MOTOR HOUSING: Cast Iron ASTM A-48, Class 30.
SEAL PLATE: Cast Iron ASTM A-48 Class 30.
IMPELLER:
Design: 2 Port, Enclosed. Dynamically
Balanced, ISO G6.3.
Material: Cast Iron ASTM A-48 Class 30.
SHAFT: 416 Stainless Steel.
SQUARE RINGS: Buna-N.
HARDWARE: 300 Series Stainless Steel.
LIFTING CHAIN: Yoke, Galvanized
PAINT: Air Dry Enamel.
SEAL: Design: Tandem Mechanical,Oil Filled
Reservoir.
Material: Rotating Faces - Carbon
Stationary Faces - Ceramic
Elastomer - Buna-N
Hardware-300 Series Stainless
CABLE ENTRY: 25 ft. (7.6M) Cord. Epoxy Sealed
Housing with Secondary Pressure
Grommet For Sealing and Strain Relief
.
SPEED: 1150 or 1750 RPM (Nominal).
UPPER BEARING:
Design: Single Row, Ball
Lubrication: Grease
Load: Radial
LOWER BEARING:
Design: Double Row, Ball
Lubrication: Grease
Load: Radial & Thrust
MOTOR:
Design: NEMA B Torque Curve. Air-Filled,
Squirrel Cage Induction,
Insulation: Class F.
THREE PHASE: Dual Votage 230/460;
Requires Overload Protection to be
Included in Control Panel.
MOISTURE SENSOR: N/O, Requires Relay in Control Panel
TEMP SENSOR: N/C,Requires Relay in Control Panel.
OPTIONAL EQUIPMENT: Seal Material, Impeller Trims,
Additional Cable.
6SE10036EHA - 48.63 (1235)
6SE10046EHA - 48.63 (1235)
6SE15036EHA - 48.63 (1235)
6SE15046EHA - 48.63 (1235)
6SE20036EHA - 48.63 (1235)
6SE20046EHA - 48.63 (1235)
6SE25036EHA - 48.63 (1235)
6SE25046EHA - 48.63 (1235)
6SE30046EHA - 52.81 (1341)
6SE30034EHA - 52.81 (1341)
6SE30044EHA - 52.81 (1341)
6SE40034EHA - 52.81 (1341)
6SE40044EHA - 52.81 (1341)
6SE50044EHA - 52.81 (1341)
6SE60044EHA - 58.25 (1480)
6SE75044EHA - 58.25 (1480)
6SE100044EHA - 58.25 (1480)
8.63
(219)
30.47
(774)
18.00
(457)
12.65
(321)
24.69
(627)
4