Crane Merchandising Systems Merchant 180, Operator'S Manual

Page: 89 / 170

Merchant™ Operators’ Guide Program:
1810006 81 January 2008
FIFO (First In, First Out)
FIFO (First In, First Out) allows you to program your Merchant™ to run several adjacent selections
on a tray as a single selection. No matter which selection ID of the group is entered, the Merchant™
will vend round-robin from the group of spirals, skipping selections that are out-of-service. This
feature can provide a First-In-First-Out for perishable foods. It also helps to prevent one spiral of
duplicate selections to go empty before the others of the same selection.
FIFO Setup - Adding Groups
1. Press until you reach the Main
Menu , then use or to select
Product Configuration and press .
2. In the Product Configuration menu, use
or to select FIFO Setup and
press .
3. In the FIFO Setup menu, use
or to select Add Group 1
and press .
4. In the Add Group 1 menu, use
or to select the product(s)
you wish to add or delete from the group by
pressing to remove or add the
“ X” (s) next to the products.
NOTE
By pressing , you are able to
quickly remove or add the “ X ”(s)
from all listed products for the group.
+
_
+
_
+
_
+
_
Main Menu
Data Recall
5
Diagnostic
Test
Price
Product Configuration
6
Press EDIT to Select
Product Configuration
Configuration Version
5
Selection Configuration
FIFO Setup
Couple Motors
6
Press EDIT to Select
FIFO Setup
Add Group 1
5
6
Press EDIT to Select
Add Group 1
Product 103
5
X
Product 105
Product 106
X
Product 107
X
Product 109
6
* = Set or Clear All