Merchant™ Operators’ Guide
Program:
1810006
135
January 2008
View Image Info (Data Description) on Data Key
NOTE
In performing this procedure, follow the
instructions in “Connect and Disconnect the Data
Key” on page 127 to install and remove
the Data Key
1. After installing the Data Key, access the
System Settings
menu by pressing
until you reach the
Main Menu
, then press
to scroll down to
System Settings
and press
.
2. In the
System Settings
menu, press
to select
Serial Flash
and press
.
NOTE
This procedure is performed in exactly the
same manner whether using the
Configuration
Data
or the
Config & Sales Data
functions.
3. In the
Serial Flash
menu, press
to select
Configuration Data
OR
Config &
Sales Data
and press
.
NOTE
If the Data Key has no data stored, the only item
in the
Configuration Data
OR
Config & Sales
Data
menu will be “
Save Data
,” In that case,
there will be no Image Info to view.
4. In the
Configuration Data
OR
Config &
Sales Data
menu, press
to select
Image Info
and press
.
System Settings
Clock
5
Language
Monetary
Data Transfer
Serial Flash
6
Press EDIT to Select
Serial Flash
Firmware
0
Default Data
0
Configuration Data
1
Config & Sales Data
0
Language Data
0
Press EDIT to Select
Configuration Data
Image Info
5
Load Data
Delete Data
Save Data
6
Press EDIT to Select
Summary of Contents for Merchant 180
