manualshive.com logo in svg

Cranborne Audio Camden EC2, User Manual

Share
Download
Cranborne Audio Camden EC2 User Manual Download Page 13

Hardware Setup: Using C.A.S.T.

This hardware setup diagram will get Camden EC2 connected within a C.A.S.T.-enabled system
alongside an N22 and N22H breakout box.

1. Connect mains power into the external PSU supplied in Camden EC2’s packaging and

connect the Power Connector into Camden EC2’s Power Inlet [R11].

2. Connect Camden EC2’s C.A.S.T. Output [R9] to a C.A.S.T. Input on N22 using a shielded

Cat 5e, Cat 6, or Cat 7 cable.

3. Connect N22H’s C.A.S.T. Output to Camden EC2’s C.A.S.T. Input [R1] using a shielded Cat

5e, Cat 6, or Cat 7 cable.

4. Power on Camden EC2, followed by other downstream equipment.

5. On Camden EC2, set Source Switch [R2] on the rear panel to C.A.S.T.

Now Camden EC2 is fully integrated into a C.A.S.T. system. Mic/Line sources connected to N22H
will arrive at Camden EC2’s preamps ready for processing before travelling through C.A.S.T.
directly to N22 for further processing and recording.

At the same time, audio connected to N22 is sent through C.A.S.T. and into Camden EC2’s Aux
In/C.A.S.T. Level [F12]. Then the Aux 1 mix created on Camden EC2 is sent through C.A.S.T. and
onwards to the outputs of the connected N22/N22H.

Camden EC2 User Manual

-Page 13-

©2020 Cranborne Audio Ltd

Summary of Contents for Camden EC2










































Reviews:

No comments

Brands by name

Popular brands

Load more brands