Leaf and litter vacuum
Original Operation Manual
English -11
6.5
Activities after use
Please perform the following steps after using the machine:
1. Always empty the collection bag before storage.
2. The machine must be left in a clean and dry condition
3. Apply the parking brake and close the fuel tap.
6.6
Emptying the collection bag
The collection bag's filling limit is reached when the machine starts
to move down at the back and the vacuum nozzle rises up.
ATTENTION!
Risk of injury from the fan!
Working on the machine with the motor running can lead to
minor injuries.
Always switch off the motor when:
Carrying out any work on the collection bag
Carrying out any work on the vacuum nozzle and intake
canal
Empty the collection bag immediately when it is full. Do this as
follows:
1. Set the drive handle to Idle
2. Pull the throttle lever toward you
3. Pull the collection bag release toward you
4. Then detach the collection bag from the guide rail and empty it.
5. Insert the empty collection back into the guide rail and push it
into the holding fixture.
6. Push up the collection bag release
7. Use the throttle lever to set the motor power.
7
Start up (first machine inspection)
Assembly and start-up shall be performed by your authorised
Cramer dealer.
7.1
Safety
Before start-up, you must have read and understood the operation
manual and be familiar with the machine's functions.
7.2
Start-up and functional test
Before initial start-up, please check that all safety devices are
attached. Only then shall the following functional test be performed:
After an operating duration of approx. one hour, all fastening screws
of the blades as well as the fastening screw of the blade disc should
be re-tightened.
Functional test / starting the machine
1. Park machine safely on an even surface
2. Add fuel and check the oil level
3. Attach protective devices
4. Switch on the machine
If no functional failures occur until then, the machine is ready for use.
If functional failures do occur, please contact your Cramer dealer.
