Page 1: ...DO NOT alter this product in any manner For example do not weld external Iockbars or attach electfica_ equipment This may cause product damage or personal inju_ Ciose the drovers and doors before moving this product The dr_rs or doors could come open and make the product unstable and tip which may cause personal injury or product damage The maximum weight for each drawer should be no more than 50 ...
Page 2: ...ers and shelves may be positioned to suit your needs During installation of the slides start at either the top or the bottom oftl_ unit a_ work to_rd the other end Place the rear of the outside slide at the rear of the unit line up the holes and attach the slide with tw 3 1 4 20 x 7 16 hex screws and _ 1 2 20 hex nuts Finger tighten Attach the remaining slides leaving a gap between them according ...
Page 3: ...e retaining clip DOOR CATCH ASSEMBLY Mount the door catch opposite the door hinge in the upper hole _th one I 4 _ round head machine _rew and one 1 4 20 hex nut Square up the door and the catch Wrench tighten all of the screws REMOVING AND INSTALLING DRAWERS Fully extend the d_f Then push it _k a _tien of an inch tns_ a screwdriver into the s ot in the slide and depress the stop until it dears the...
