Craftsman C950-52123-0, Owner'S Manual

Page: 28 / 104

28
ENGINE:
Brand Briggs & Stratton®
Model Series Snow Series TM
Gross Torque* 8.0 T.P. @ 3060 rpm
Type 4-Cycle - OHV
Displacement 12.5 cu in. (205 cc)
Starting System Recoil, 110V Electric w/Cord
Spark Plug Gap 0.030 in. (0,76 mm)
Spark Plug, EMS “Q” 691043
Oil Capacity 20 oz (0,59 liters)
Hydraulic Fluid Mineral 5W30
Fuel Tank Volume 3.2 qts (3,0 liters)
Ignition System This spark ignition system complies
with Canadian standard ICES-002.
AUGER/IMPELLER:
Clearing Width 24 in. (61,0 cm)
Intake Height 20 in. (51,0 cm)
Auger/Impeller Diameter 10 in. (25,4 cm)
Number of Impeller Blades 3
CHUTE:
Chute Deflector Manual
Chute Rotation Left Side Crank - 190° (3.5 Turn)
DRIVE SYSTEM:
Drive Type Friction Disc - Traction Lock Pin
Drive Speeds 6 Forward Speeds, 2 Reverse
Tire Size 13 x 5 in. (33 x 13 cm)
Tire Inflation See the sidewall of the tire for proper inflation.
Power Rating
The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive Engineers) code
J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained and corrected in accordance with
SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horsepower values are derived at 3600 RPM. Net power values
are taken with exhaust and air cleaner installed whereas gross power values are collected without these attachments. Actual gross engine
power will be higher than net engine power and is affected by, among other things, ambient operating conditions and engine-to-engine
variability. Given the wide array of products on which engines are placed, the gas engine may not develop the rated gross power when
used in a given piece of power equipment. This difference is due to a variety of factors including, but not limited to, the variety of engine
components (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient operating conditions
(temperature, humidity, altitude), and engine-to-engine variability. Due to manufacturing and capacity limitations, Briggs & Stratton may
substitute an engine of higher rated power for this Series engine.
SPECIFICATIONS