Page 1: ...CRRFTSMRK INSTRUCTIONS FOR ASSEMBLY AND OPERATION OF YOUR UNIVERSAL JIG 9 3236 49L 16 Sold by SEARS ROEBUCK AND CO Hoffman Estates IL 60179 USA Made in U S A 7 05 60683 ...
Page 2: ...othing gloves neckties or jewelry rings wrist watches to get caught in mov ing parts Nonslip footwear is recommended Wear protective hair covering to contain long hair Roll long sleeves above the elbow 10 11 12 USE SAFETY GOGGLES Head Protection Wear Safety goggles must comply with ANS Z87 1 at all times Also use face or dust mask if cutting operation i_ dusty and ear protectors plugs or muffs dur...
Page 3: ...ing the Universal Jig or operating the saw 8 Always be sure that the Jig is correctly resting on the saw table top with the protruding part of the base fully in the saw table miter slot before inserting and clamping the workpiece or making a cut Failure to observe all safety rules could result in prop erty damage and or serious personal injury 9 WARNING THE TABLE SAW GUARD MUST BE REPLACED IMMEDIA...
Page 4: ...he flat surface par allel to the saw blade and at a right angle to the saw blade To rotate the angle plate 90 degrees on the base loosen the knob K quite a number of turns until the angle plate can be lifted upwards from the base and then rotated 90 degrees After turning the angle plate 90 degrees place back down against the base and tighten the knob K Be sure that the angle plate has nested flat ...
