Craftsman 315.101140 Operator'S Manual Download Page 9

Page: 9 / 14

ASSEMBLY

UNPACKING

This product has been shipped completely assembled.

Carefully remove the tool and any accessories from the

box. Make sure that all items listed in the packing list
are included.

Inspect the tool carefully to make sure no breakage or

damage occurred during shipping.

Do not discard the packing material until you have

carefully inspected and satisfactorily operated the tool.

If any parts are damaged or missing, please call

1-800-932-3188 for assistance.

PACKING LIST

Drill
Case
Operator’s Manual

WARNING

If any parts are missing do not operate

this tool until the missing parts are replaced. Failure
to do so could result in possible serious personal
injury.

WARNING

Do not attempt to modify this tool

or create accessories not recommended for use
with this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.

WARNING:

Do not connect to power supply until

assembly is complete. Failure to comply could result
in accidental starting and possible serious injury.

Summary of Contents for 315.101140















Search results

Summary of Contents for 315.101140

Reviews:

Related manuals for 315.101140

Brands by name

Popular brands

Craftsman 315.101140, Operator'S Manual

Search results

Summary of Contents for 315.101140

Reviews:

Related manuals for 315.101140

Brands by name

Popular brands