background image

OPERATOR’S MANUAL

3-DRAWER BB CHEST - MODEL # 31017

capacities

service parts

safety

•  The maximum weight for each drawer should be no more than 

25 pounds.

• Empty weight of the unit is 34 lbs 

•  The maximum product weight, including contents, should be no 

more than 125 pounds.

F1843

DaNGer 

is used to indicate a hazardous situation which, 

if not avoided, will result in serious injury or death.

WarNiNG

 

indicates a hazardous situation which, if not 

avoided, could result in serious injury or death.

cautioN

is used to indicate a hazardous situation which, if not 

avoided, may result in minor injury, moderate injury, or property 

damage.

cautioN:

  Read and follow all Safety Rules and Operating 

Instructions before first use of this product.

DaNGer

•  

Do Not

 stand on this product. You may fall or cause product to 

tip.

•  

Do Not

 open more than one drawer. The product may become 

unstable and tip.

•  

Do Not

 step in the drawers.  You may fall or cause product to 

tip.

•  

Do Not

 mount this product on a truck bed or any other moving 

object.

•  

Do Not

 move the product prior to closing and locking all the 

drawers. The drawers could come open and make the product 

unstable and tip.

cautioN

•  

This product is not designed to be directly lifted with a fork lift, or 

to be towed with any mechanical devices.

•  The maximum weight for each drawer should never be exceed-

ed.

•  Only transport this product empty.  Properly secure when trans-

porting.

•  

Do Not

 exceed maximum product weight, including contents.  

See Operations Sections: Capacities for more information.

WarNiNG

•  Wear safety GLasses

 when removing or repositioning the 

slides.

•  

Do Not 

pull this product when moving it. Push the product to 

prevent personal injury.

•  

use tHe BraKes

 when not moving this product. This will 

prevent the product from rolling.

•  

Do Not

 alter this product in any manner. For example, do not 

weld external lockbars or attach electrical equipment.

•  Keep the product on level surfaces. The product may become 

unstable and tip if stored or moved on an uneven surface.

•  

Be carefuL

 when closing the cover. Remove hands before 

the cover closes completely.

maiNteNaNce

caLL 1-800-4my-Home or (1-800-366-7278) for service 

parts.

 Refer to Service Parts Drawing for full listing of Service 

Parts.

LocatiNG moDeL # iNformatioN

Model numbers and other information required for service parts is 

located on a label on the interior right side of the top most drawer.

Distributed by Sears Brands Management Corporation, Hoffman Estates, IL 60179

•  Periodically the drawer fronts, drawer trim, and other surfaces 

should be cleaned with a mild detergent and water.

•  Auto wax will preserve the unit’s luster finish. Apply the wax as to 

a car. The wax will also help protect the unit against scratches.

• Lubricate lock with graphite, (yearly).

•  Grease and oil can be removed with most standard cleaning 

fluids. For safety, use a nonflammable cleaning fluid.

•  If drawer liners are supplied, it is recommended they are used 

to protect the finish inside the drawers and to make the drawers 

easier to clean. The drawer liners may be cleaned with soap and 

water.

Ball bearing slides

Friction slides

R

Summary of Contents for 31017









Reviews: