background image

SAFETY RECALL 

 

CHECK YOUR TWO STAGE COMPACT  

SNOW THROWER TO SEE IF IT IS RECALLED… 

 

Yard Machine Models Affected 

 

31A-3AAD700, 31A-3BAD700,  

31A-3BAD729, 31A-3BAD752,  

31A-3BAD762 and 31AS3DDE729 

 

Troy-Bilt Models Affected 

 

31AS3BB2766 

 

Sold between July 2004 and March 2006 

________________________________ 

 

Craftsman Models Affected 

 

247.88255 (31A-3BDE799) 

Sold between July 2004 and March 2006 

 

247.88700 (31AS3AAD799) 

Sold between July 2005 and March 2006

 

 

 

 

Over inflating the tire with excessive pressure (well above 20 PSI) may 

cause the plastic wheel rims to explode posing a risk of serious injury. 

 

Do not inflate tires! 

CALL

 

Customer Service toll free between 

8 AM and 5 PM EST Monday through Friday. 

1-888-848-6038  

 

IMPORTANT!

 If you have already received and installed the Recall Kit which includes two 

Pressure Relief Valves, two Warning labels, and installation instructions (Form # 769-02127, 
769-02722 or 769-02723), please disregard this notice. 

 

In cooperation with the U.S. Consumer Product Safety Commission            

Form No. 769-04961

 

Summary of Contents for 247.887000














































Reviews: