Blade Installation
WARNING
Before beginning installation, place the tractor on a firm and level surface, set the
parking brake, place the PTO in the disengaged (OFF) position, stop the tractor’s
motor and remove the ignition key to prevent unintended starting.
WARNING
Cutting blades are sharp. Always protect hands by wearing heavy leather work
gloves to grasp blades.
1.
Gently flip the deck over to expose its underside.
2.
Stablize one of the cutting blades with a blade lock tool or a block of wood.
See Figure 2.
Figure 2
Model 19A30041791 mulch kit is designed for use with select 50-inch triple-blade
stamped cutting decks. Refer to your tractor’s Operator’s Manual to assure
compatibility.
Carton Contents
Before beginning installation, remove all parts from the carton to make sure
everything is present. Carton contents are listed below and shown in Figure 1. Part
numbers are shown in parentheses.
•
Three Mulching Blades (942-05052-X)
•
One 50” Deck Mulch Plug Assembly (631-05178)
•
One Wing Knob (720-04122)
•
One Chute Adapter (731-10133)
Figure 1
Form No. 769-18990
(November 11, 2018)
EXTREME MULCH KIT 50” DECK
Model No. 19A30041791
INSTALLATION MANUAL
Summary of Contents for 19A30041791
Page 4: ...Notes 4 ...
Page 8: ...8 Notes ...
