Crafco SUPER SHOT 125, Parts Manual

Page: 44 / 230

Super Shot 125 Diesel Melter Part Manual
Chapter 5 Operating Instructions
©2017 by Crafco, Inc. All Rights Reserved………………..…………………………………..….Operating Instructions 5-16
5.14 Overnight Heater Use
An overnight heater rod is available as an option. 24190 110V and 24194 220V. The overnight
heater may be used to maintain an overnight heat transfer oil temperature of approximately 200-
250°F (93.3°C)
Step Action
1 Attach the heater power cord to a suitable extension cord.
2 Attach the extension cord to its own outlet rated for 15 amps minimum.
WARNING
Suitable extension cord size requirements for 110 Volt use:
25-50 FT • 16-20 Amps • 12 Gauge (Heavy Duty) or 10 Gauge (Extra Heavy Duty)
100 FT • 16-20 Amps • 10 Gauge (Extra Heavy Duty)
Suitable extension cord size requirements for
220 Volt use:
25-50 FT • 8-10 Amps • 14 Gauge (Medium Duty) or 12 Gauge (Heavy Duty)
100 FT • 8-10 Amps • 12 Gauge (Heavy Duty)
Failure to use the correct size extension cord could result in damage and
possible fire!
3 Disconnect the heater when using the machine’s burner system.
CAUTION
Do not use the heater without heat transfer oil in the tank. Doing so will overheat and
damage the heater, and it will have to be replaced.
Table 5-13 Overnight Heater Use