Crafco EZ 500 Series II, Manual

Page: 43 / 136

EZ 500 Series II Melter Part Manual
Chapter 6 Maintenance Instructions
©2019 by Crafco, Inc. All Rights Reserved………………..…………………………………..….…Maintenance Instructions 6-5
6.13 Service Instructions
Step Action
1
Do a general inspection of the machine at least once a week.
2
Replace all worn or damaged parts.
Note: Keep regular replacement items in stock for emergency repairs to prevent
costly downtime. See Table 6-4 Recommended Spare Parts
3 Make necessary adjustments and tighten all loose nuts or screws.
4 Watch for leaks. Tighten fittings or repair as necessary.
5
Clean the external surfaces of the machine at regular intervals.
Note: Refer to the material manufacturer’s instructions for recommendations.
6 Follow the recommended maintenance per Table 6-1 Maintenance Chart
For service, find a list of authorized Distributors and service centers at Crafco.com/Distributors .
6.14 General Maintenance Parts
Quantity Description Machine Part No.
1 Fuel Filter All 41867
1 Oil Filter All 45389
1 Air Filter All 45391
1 Nozzle, Burner 1.5x80B All 41883
1 Packing, Material Pump All 29990S
1 Hydraulic Oil Filter All 45438
Table 6-5 Hydraulic Oil All Table 6-5
Table 6-5 Heat Transfer Oil All Table 6-6
1 Drive Belt for generator 46100EB 45748
Table 6-2 Service Instructions
Table 6-3 General Maintenance Parts