IBR650
(Integrated Broadband Router)
QUICK START GUIDE
1
)
What’s In The Box
SETTING UP THE ROUTER
Purchase a data plan. Then insert the SIM if model requires.
Plug the power supply into an electrical outlet.
Connect modem ( , , , , ) antennas (finger tight only).
Connect the power supply to the IBR650.
Ensure power is switched on. O = OFF I = ON
2
)
3
)
2
3
4
for more information about your product, visit:
www.cradlepoint.com
AC Power Supply
Quick Start Guide
PORTS & SWITCHES
Integrated Broadband Router
With Modem Antennas
MODEMS/
DATA SOURCE
( WAN )
default
ETHERNET CONNECTIONS
POWER
12VDC
RESET
POWER
ON/OFF
POWER
LED
ATTN
LED
MODEM
LED
SIGNAL
STRENGTH
LEDS
AUXILIARY MODEM
ANTENNA
CONNECTOR
(SMA)
MAIN MODEM
ANTENNA
CONNECTOR
(SMA)
USB
(Standard-A)
MODEM ANTENNAS
( , , , , )
Finger Tight Only
Find this label on the bottom of your router.
Model No.: IBR650
Part No.: IBR650
www.cradlepoint.com
H/W ver.: 2.0
MAC Address : 0030440c1fc1
Serial No.: MM100167900418
ESN (Hex): A1000010000557
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions (1) This device may not cause harmful interference and (2)This device must
accept any interference received, including interference that may cause undesired operation
Made in Taiwan
12V 1.5A
RoHS
MFG DATE: MAR 2011
Default Password: 440c1fc1
Contains FCC ID: N7N-MC5728
▲
COMPUTERS
or LOCAL DEVICES
( LAN )
default
Mounting Bracket
IP PASSTHROUGH
To quickly and easily configure IP Passthrough, select
GETTING STARTED
in the top navigation menu and
IP
PASSTHROUGH SETUP
in the dropdown menu. The IP
Passthrough Setup Wizard will guide you through the setup
process.
For more IP Passthrough options, select
NETWORK
SETTINGS
in the top navigation menu and
LOCAL
NETWORKS
in the dropdown menu. Select the LAN you
would like to edit and set the Routing Mode to “IP
Passthrough”.
ACTIVATE YOUR MODEM
A wireless broadband data plan must be added to your IBR650. Wireless broadband data plans are
available from wireless carriers such as Sprint, Verizon, AT&T, EE, Vodafone, and Clearwire. Mobile
broadband, M2M and router pricing plans are available. To add or transfer a line of service you will need
to provide a unique identifier such as ESN for 3G EVDO modems, MAC address for WiMAX modems, or
IMEI/MEID for LTE or HSPA+ modems. LTE and HSPA+ plans require a SIM. SIM provisioning for LTE and
HSPA+ models is done the same way as for USB modems. Once provisioned insert the SIM into the
router until it clicks into place, close the SIM door, and turn on the power switch. After adding a data plan
to the Verizon 3G EVDO model the modem may need to be activated. Log into the IBR650 administration
pages (see page 3) and select
Internet
from the top navigation bar and then
Connection Manager
from the dropdown menu. Find and select the CradlePoint “EVDO Modem” and click
Control
and then
click
Activate
. When modem activation is complete, confirm the modem LED is solid green on the router.
For more information on activation see www.cradlepoint.com/activation.
The NM (no module) units do not have an integrated modem. An attached USB modem may require
activation.
SIM SLOT
(SIM-BASED VERSIONS ONLY)
4
)
See Product Manual for suggested antenna positions.
ACCESSING THE ADMINISTRATION PAGES
To make configuration changes to your router, open the IBR650’s
GUI-based administration pages.
1) Connect via Ethernet.
2) Open a browser window and type “
cp/
” or “
192.168.0.1
” in the
address bar. Press
ENTER/RETURN
.
3) When prompted for your password, type the
eight character
DEFAULT PASSWORD
found on the product label.
THE FIRST TIME SETUP WIZARD
When you log in for the first time, you are automatically directed to the
FIRST TIME SETUP WIZARD
, which
will help you customize your COR IBR650. Change any of the following:
Administrator password
Time zone
Access Point Name (APN) for SIM-based modems
WAN failure check mode
NOTE: To return to the First Time Setup Wizard after your initial login, select GETTING STARTED on the top navigation bar and
FIRST TIME SETUP in the dropdown menu.
RESET:
To restore the COR IBR650 to its factory default settings, press and hold the
RESET
button on the side
of the device for ten seconds. Reset returns the login password to the
DEFAULT PASSWORD
and resets all
configuration changes.
SPECIAL FEATURES
www.cradlepoint.com/IBR650
To learn more about features, visit:
IPSec VPN End-Point Support
GRE Tunneling
Data Usage Management & Alerts
GPIO Interface
GPS
(if supported by modem carrier)
Failover/Failback
IP Passthrough
VLAN Support
USB to Serial Console Passthrough Support
LAN/WAN Affinity
BGP/OSPF/RIP
VRRP
