Mechanical Installation
13 / 32
3.2.2
Installation requirements
Make sure the device is not electrically connected or energized before
installing.
Never install, use or maintain the device in lightning, rain, snow, wind and
other severe weather.
Do not wear conductive objects such as watches, bracelets, rings, and
necklaces when installing, operating, or maintaining the device.
After installing the equipment, remove empty packing materials such as
cartons, foams, plastics, and cable ties.
Paint scratches on the cabinet body caused in the process of transportation
and installation must be repaired. It is strictly prohibited to expose scratched
parts to the outdoor environment for long periods of time.
Installation procedures
The AC-PLC KIT can be installed on a wall or rack. Since the installation procedures
are similar, rack installation procedures are shown in this manual for reference.
WARNING!
All the installation and wiring connections should be performed by qualified
technical personnel only.
CAUTION!
Heavy device, move it carefully to avoid falling.
The installation procedures and installation illustrations are as follows:
1.
Fasten four fixing brackets (2) into the pre-drilled mounting holes on the
backside of the enclosure (1) with eight M6X14 screws
（
3
）
in sequence.
Tool: 10# socket wrench, torque value
：
6 Nm.
