W
haT
can
be
seT
laTeR
?
BA_v2_colibri_ccTalk_EN_1-0
37
9
What can be set later?
In this chapter, you will find out general information about the NRI service and configuration
tools for the v
2
colibri and what device functions you can retrospectively configure
.
In order to meet the requirements of the Italian gaming machine act subsequent
configuration of the ccTalk ACMI model is impossible. If you want to change the
factory settings please contact our sales representative.
9.1
Service and configuration tools
Depending on whether you want to configure the coin validator in the workshop or on site a PC
software or a mobile service tool is recommended.
9.1.1
WinEMP PC configuration application
The WinEMP PC application is for diagnostics and individual configuration of NRI coin validators
and for updating the complete coin and device configuration using the data blocks currently
made available by Crane Payment Solutions (data block upload).
The WinEMP application identifies the coin validator that is connected to the PC and its specific
data and displays this data on your PC's screen for diagnosis and configuration.
The separate software manual describes how to connect the coin validator to your PC and how
to install and use the software.
9.1.2
On-site service tool HENRI
+
The HENRI
+
service tool is suitable for on‑site configuration to also update the complete coin
and device configuration quickly and easily by means of a data block upload.
The separate short reference guide describes how to connect and use the tool.
HENRI
+
is also suitable for on-site firmware updates.
9.2
Which device functions can be set?
• Acceptance of genuine coins and rejection of false coins
(acceptance band adjustment after insertion of genuine coins and false coins)
•
Coin via channel assignment of
–
coin value
–
ccTalk coin ID
–
ccTalk coin type/position 1–16
