KA BAND OUTDOOR TWT AMPLIFIER
4-14
To enable/disable the NTP, set the “NTP ENABLED” field to either 1 or 0. To set up an email
group, set the “TRIGGER” field to “alarm” or “fault” or both “alarm, fault”. Set the “HOLD OFF”
field to a number between 0 and 9999 to set the number of minutes the amplifier will wait before
sending an email after an alarm or fault occurred. Enter the email addresses in the “SENDTO”
filed, comma delimited if multiple addresses are entered. Set the “SENDLOG” field to 1 to attach
the meter log to the email.
4.4.7 Firmware
updates
Using an FTP client or web browser, new firmware can be uploaded to the TWTA. Simply drag
and drop the new firmware file to the FTP window. When the transfer is done, close the FTP
window and the amplifier will reprogram the flash and restart. Contact CPI for latest firmware
updates.
INSTALLATION AND OPERATION MANUAL
