3C
Interfacing and Programming
CPI Canada Inc.
Use and disclosure is subject to the restrictions on the title page of this CPI document.
Page 3C-86
CMP 200
®
X-Ray Generator Service Manual Ch # 901476-04 Rev. C
3C.13.1 Accessing the Utilities Menu (Cont)
Figure 3C-24: System utilities menu
3C.13.2 APR
Editor
It is strongly suggested that you review the section ANATOMICAL PROGRAMMING SELECTOR in the operator’s manual before
proceeding. A good understanding of the terminology and APR menu structures is needed to make APR changes.
Use these steps to access the APR editor function.
Step Action
1.
From the system utilities menu (figure 3C-24), press
APR Editor.
A screen similar in appearance to the normal operating screen
will be displayed (figure 3C-25). However, as a reminder that you are in APR editor mode, the word
APR EDITOR
will be
displayed in the APR window.
2.
Refer to the applicable subsections (following) for the procedures to change parameters and technique for existing APR items,
and to edit, add, or delete APR, procedural, or menu items.