CPA 1041130 User Manual Download Page 21 | Manualshive

Page: 21 / 21

CPA 1041130 User Manual Download Page 21

BLUEFIRE HEAT PUMPS MANUAL

pag. 21 di 20

www.cpa-piscine.it

Ver.06

–

2018-05-28

14.

HOW TO OBTAIN ASSISTANCE

If you have any problems with your heat pump, please contact your installer immediately with the
following information:

A)

Serial number located on the product label

B)

Purchase document

C)

Description of the malfunction found

ATTENTION: Freon gas is very stable and does not degrade or be damaged. If your heat pump needs
Freon and once it has been re-loaded the problem is not solved, it is very likely that there is a
leak. Then locate the leak and repair it.

15.

RECOMMENDATIONS FOR CORRECT INSTALLATION

▪

The information contained in this document may vary at the discretion of the editor, without prior notice, together with the changes to the product in question in this document: it will be

▪

responsibility of the customer when placing the order to verify the persistent correspondence of the product to the information sheet.

▪

Any technical diagrams reproduced in this document have a purely informative value and are not valid for regulatory purposes

▪

All operations must be performed in a workmanlike manner and exclusively by qualified personnel in possession of the requisites required by current regulations.

▪

It is essential that the installation is carried out by competent and qualified personnel, in possession of the technical req uirements required by the specific regulations on the subject. By qualified personnel we mean those
people who have been authorized by the plant safety manager to carry out any necessary activity and in this being able to know and avoid any danger.

▪

This document does not in any way replace the technical documentation relating to the products indicated provided by the manufacturer of the same, to which the inst aller must contact in order to obtain all the technical
information not present in the aforementioned document.

▪

The C.P.A. s.r.l. assumes no responsibility for any problems deriving from erroneous interpretation of the text.

▪

The C.P.A. s.r.l. furthermore, it declines all responsibility for possible inaccuracies contained in this manual, if due to printing or transcription errors.

«
...
19
20
21

Summary of Contents for 1041130






















Reviews:

No comments