Upgrading to the Latest Release
Upgrade using the CLI
To upgrade a system that is already running EQ/OS 10 to the latest release using the CLI, do the
following:
1. Ensure that the upgrade image is available on an FTP or HTTP server that is accessible to
Equalizer. This can be either the Coyote Point Systems, A Subsidiary of Fortinet, Inc.
Upgrade server or a local server.
2. Log in to the Equalizer CLI using the serial console or via SSH on a VLAN that is configured
for SSH access.
3. At the
eqcli >
prompt, enter:
eqcli > upgrade
URL
The URL is an unadorned
ftp://
or
http://
URL that completely specifies the path to the
upgrade image
directory
, as in this example:
eqcli > upgrade ftp://10.0.0.21/pub/patches/upgrades/10.0.0/upgrade
4. Equalizer downloads the upgrade files automatically, unpacks them, and then begins the
upgrade. No user intervention is required.
When the upgrade is complete, the following messages are displayed:
Upgrade successfully completed. New version is default at next system boot.
5. To reboot the system and run the newly installed version, enter:
eqcli > reboot
Upgrade using the GUI
Refer to
on page 282 for instructions on upgrading using the GUI.
Copyright © 2014 Coyote Point Systems, A Subsidiary of Fortinet, Inc.
All Rights Reserved.
85
Equalizer Administration Guide
Summary of Contents for Equalizer GX Series
