Coyote Point Systems Equalizer GX Series, Administration Manual

Page: 404 / 866

Working with Clusters and Match Rules
Displaying Match Rules
On the GUI, click on a cluster name in the navigation pane and then click on any of the Match
Rules associated with any of the HTTP or HTTPS clusters to display the match rules defined for
that cluster.
On
eqcli
, enter the following:
eqcli
> cluster clname match
In the example below the Match Rules on the cluster "SP-fe_http" are displayed:
eqcli cl-SP-*> show match
Name Server Pool Responder Expression
nopersist serverool1 responder1 *
images *
test *
ma01 adp_tcp *
New_Match_Rule *
Default Match Rule
All Layer 7 clusters created via the Equalizer Administration Interface start with a single match
rule (named
Default
) that matches all requests and selects all servers.
match Default {
any()
} then {
servers = all;
}
When displayed
any()
appears in the Expression field in the GUI as shown below.
The default rule specifies that all server pools defined in the cluster should be used for load
balancing the request, and that all flag settings for the request will be inherited from the cluster
flag settings.
Creating a New Match Rule
Proceed with the following to add a match rule to a virtual cluster using the GUI:
1. Log into the GUI using a login that has add/del access for the cluster. See Logging in on
page.
2. In the navigation pane on the left, right-click the name of the Layer 7 cluster to which you
want to add a match rule, and select
Add New Match Rule
to display the following:
404 Copyright © 2014 Coyote Point Systems, A Subsidiary of Fortinet, Inc.