Coyote Point Systems Equalizer GX Series, Administration Manual

Page: 275 / 866

Maintenance
The Maintenance screen (tab) allows you to access the sections in the related topics.
Setting Date and Time
Setting Data and Time using the GUI:
The System time setting screen is used to manually enter the current system date and time. This
is accessed by selecting Equalizer on the left navigational pane and selecting the
Maintenance
(tab)
and then selecting
Date & Time
to display the following.
Set Time Zone
Use the Time Zone drop down list to set the Time Zone. Click on Commit to save the settings. Click
on
Reset
to reset all the newly entered values to the previous values.
Manually Set Date and Time
Enter the current date and time in the Date field in the format:
mm/dd/yyyy hh:mm:ss
Click on
Commit
to save the settings.Click on
Reset
to reset all the newly entered values to the previous
values.
Automatically Set Date and Time
Network Time Protocol (NTP) is a protocol and software implementation for synchronizing the
clocks of computer systems. It provides Coordinated Universal Time (UTC) including scheduled
leap second adjustments and will be used to synchronize the clock in Equalizer. Select the
Enable
NTP Synchronization
option to enable this feature. Click on
Commit
to save the settings.
Refer to Selecting an NTP Server for additional information about the NTP servers.
Setting Date and Time using the CLI:
Refer to
"Global Commands"
on page 163 to set up date and time using the CLI.
Copyright © 2014 Coyote Point Systems, A Subsidiary of Fortinet, Inc.
All Rights Reserved. 275
Equalizer Administration Guide