Coyote Point Systems Equalizer GX Series, Administration Manual

Page: 219 / 866

User Flags
User flags are used to override permissions checks, as follows:
admin
All permissions checks are overridden for the user (including read_
global and write_global ). The user has complete administrative
control over the system. Only users with the admin flag can:
read , write , and delete any object on which they do not have expli-
cit permission
write , create , and delete object lists and user definitions (with the
exception of a user changing their own password)
read_global
- User can do a show in the global context.
write_global
User can modify global parameters and execute global commands other
than show in the global context.
read_global
User can read all global parameters.
Setting the Locale
You can set the locale for Equalizer to either English or Japanese (2 available options at this time).
The default locale is “en” for English.
For English enter the following:
eqcli user- uname >
locale en
For Japanese enter the following:
eqcli user- uname> locale ja
Creating a User
When a user name is created:
l
A default user (i.e. "touch") is assigned a
duration
of 0 seconds . When additional users are
created the default
duration
value is 3600 seconds.
l
The user creating the new user name is prompted for a password (regardless of whether
they specified the
password
keyword on the command line
).
Deleting a User
The
no user
command is immediately executed and the user name is removed, with one
exception: if the user name is the only one with the
admin
flag enabled, the user name is not
removed.
Copyright © 2014 Coyote Point Systems, A Subsidiary of Fortinet, Inc.
All Rights Reserved. 219
Equalizer Administration Guide