Coyote Point Systems Equalizer GX Series, Administration Manual

Page: 169 / 866

Cluster and Match Rule Commands
Each cluster has its own context and the settings available in the cluster’s context depends on the
cluster’s
proto
parameter -- this parameter must be specified first on the command line when
creating a cluster. A Layer 7 cluster may have one or more match rules associated with it, each
with its own context. Cluster and match rule commands are summarized in the tables below.
Using Cluster Commands in the Global Context
eqcli > cluster clname req_cmds : Create clname ( req_cmds = * commands
below)
eqcli >
cluster clname cmds ...
: Modify
clname
(
cmds
= any commands
below)
eqcli >
no cluster clname
: Delete
clname
eqcli >
show cluster [ clname ]
: Display all clusters or
clname
eqcli >
cluster clname
: Change to the "cl-clname" context(see
below)
Using Cluster Commands in a Cluster Specific Context
For all Clusters:
eqcli cl- clname > *ip ip_addr : Cluster IP address
eqcli cl- clname > *proto {http|ht-
tps|tcp|udp}
: Protocol -- MUST SET proto
FIRST
eqcli cl- clname > *port integer : Cluster port
eqcli cl- clname > show : Show the cluster con-
figuration
eqcli cl- clname > stats : Display cluster statistics
For Layer 7Clusters:
eqcli cl- clname > age integer : Cookie age in seconds (0
[default] to 31536000 -- one
year)
eqcli cl- clname > clientto integer : Client connection timeout
eqcli cl- clname > compress_min
integer
: Set the minimum file size
for compression in bytes
when compression is enabled
for Layer HTTP and HTTPS
clusters. Valid values range
from 0 to 1073741824 bytes.
The default is 1024 bytes.
eqcli cl- clname > compress_ types
string
: Mime types to compress
Copyright © 2014 Coyote Point Systems, A Subsidiary of Fortinet, Inc.
All Rights Reserved. 169
Equalizer Administration Guide