Coyote Point Systems Equalizer GX Series, Administration Manual

Page: 157 / 866

Show Configuration Command
The show configuration command can be used to display all current configuration data from the
CLI. Enter the following. The display shown is an abridged version of an actual output:
eqcli > show config
sequence = 60
locale = "en"
watchdog = 30
version = 3
extended_audit = true
customer {
sequence = "0"
# last_refresh_date = ""
# support_email = ""
# support_enddate = ""
# hw_support_level = ""
# fw_support_enddate = ""
# fw_support_level = ""
# en_support_enddate = ""
# en_support_level = ""
}
}
ntp {
sequence = "0"
enable = true
server = "pool.ntp.org"
}
syslog {
sequence = "0"
enable = false
# server = ""
}
alerts {
sequence = "0"
enable = true
}
services {
sequence = "0"
http = true
https = true
ssh = true
snmp = true
envoy = true
envoy_agent = true
fo_http = true
fo_https = true
fo_ssh = true
Copyright © 2014 Coyote Point Systems, A Subsidiary of Fortinet, Inc.
All Rights Reserved. 157
Equalizer Administration Guide