Covidien WarmTouch, Service Manual

Page: 46 / 314

Installation
3-8 Service Manual
3.4.2
Bed Installation
The warming unit can be attached to a bed that has a mounting surface up to
3.6 cm (1.4 inches) wide. Typically, the unit is attached to the bed’s head board
or foot board.
To attach the warming unit to a bed:
1.
Locate the bed hook on the back of the warming unit. Reference Figure 2-2 on
page 2-4. The hook slides in and out to accommodate different mounting surface
widths.
2.
Hang the bed hook over the mounting surface to attach the warming unit to the
bed.
Figure 3-6. Bed Installation