9-6
Valleylab FT10 Energy Platform User’s Guide
Service Manual Copies and Updates
12. On the facility computer, open the Valleylab Exchange application. Valleylab Exchange
prompts the user to put the energy platform in service mode.
13. Select the software version from Valleylab Exchange to be installed on the energy
platform. The software upgrade will start.
14. Confirm the start of the software upgrade on the generator touchscreen. A progress
bar on the generator will inform you that the software update is in process.
15. After the successful completion of the software update, the generator will
automatically restart.
16. When Valleylab Exchange indicates the upgrade is complete, turn off the generator by
depressing the On/Off button for 3 seconds.
17. Unplug the system power cord from the wall receptacle.
18. Unplug the system power cord from the rear panel receptacle.
19. Disconnect the Ethernet cable from the facility’s LAN connector.
20. Disconnect the Ethernet cable from the back of the generator.
21. Replace cover on back of generator to cover the data ports.
Service Manual Copies and Updates
The latest version of this service manual is available at www.BioMedConnect.com.
To request a hard copy of the service manual, call the telephone numbers listed in the next
section.
Covidien Technical Service
For service, contact Covidien Technical Service or your VLFT10GEN sales representative.
Contact a Covidien technical-service representative by telephone, email, or through the
Internet:
•
USA and Canada: 1-800-255-8522 Option 2
•
International: 1-303-476-7996
•
Email— [email protected]
•
Internet—http://surgical.covidien.com/service-centers
or
www.BioMedConnect.com