Covidien Newport HT70, Operator'S Manual

Page: 42 / 148

Setup and Pre-Use Preparations
3-12 Operator's Manual
Figure 3-11. Patient Circuit Connection to Exhalation Valve (Setup with HME)
9.
Attach one end of the exhalation valve tubing (smallest clear tubing) to the exhalation valve connec-
tor.
10.
Attach the other end of the exhalation valve tubing to the connector on the exhalation valve.
11.
If using the on-airway flow sensor, plug the connector into the front panel port. Attach the on-airway
flow sensor with the blue tubing toward the patient to the wye connector of the circuit. Use the 15/
22 mm adapter supplied with the on-airway flow sensor to attach to the patient interface as needed.
Use the circuit clip supplied with the on-airway flow sensor to secure the on-airway flow sensor lines
to the main breathing circuit tubing.
1 Breathing circuit 3 Exhalation tubing
2 Exhalation valve 4 Exhalation valve connector