Covidien Nellcor Series, Operator'S Manual

Page: 70 / 160

Data Management
5-12 Operator’s Manual
10.
Allow the PC to sense the new hardware and load the InstallShield Wizard, which guides
users through the entire setup process. Do not click the
Cancel button.
Figure 5-8. Sample New Hardware Wizard Screen
11.
At the prompt from the InstallShield Wizard, click on the Next button to copy the driver
to the PC.
12.
When the InstallShield Wizard provides the end-user license agreement, read it careful-
ly, then click the button for accepting the terms of the license.
13.
Click Next to formally accept the agreement.
14.
Review the Destination Folder mapping. To change the destination, click Browse and
select the desired mapping.
15.
Click Next to formally accept the Destination Folder mapping.
16.
Click Install in the resulting driver installer window. Do not click the Cancel button

Note:
If Windows Security pops up, select the option to install the driver anyway.
17.
Click the OK button to complete the installation in the resulting Success window.